Waldhausen Knotted Halter with Reins for Horses
Description
Waldhausen Knotted Halter With Reins – Rope Halter For Groundwork
The Waldhausen Knotted Halter With Reins is a knotted rope halter supplied with a set of removable closed reins, attached via rings on the halter using the included snap carabiner. It is designed for riders and handlers who want one piece of kit for groundwork, in-hand schooling and everyday leading, with reins measuring approximately 3.15 m.
It is best for horse owners doing regular groundwork or in-hand work who would otherwise need a separate halter and lead. Clip the reins on for schooling from the ground, unclip them and the halter works as a standard knotted headcollar for leading around the yard.
Key Features
- Knotted rope halter construction with pressure knots for clear, consistent communication
- Rings on the halter for attaching the reins
- Closed reins, fully removable thanks to the included snap carabiner
- Rein length of approximately 3.15 m for in-hand and ground schooling
- Dual purpose – use with reins for schooling or without for leading and handling
- Lightweight rope design that packs down small for the tack locker or lorry
Specifications
| Brand | Waldhausen |
|---|---|
| Product | Knotted halter with reins |
| Halter Type | Knotted rope halter |
| Reins | Closed reins, removable |
| Rein Length | Approx. 3.15 m |
| Fixing | Snap carabiner included |
| Suitable For | Groundwork, in-hand schooling, leading, handling |
| Country of Origin | India |
How To Use
- Check the size against your horse or pony before first use – the noseband knots should sit on the bony part of the nose, not low on the soft cartilage.
- Slip the halter over the nose, pass the poll strap behind the ears and tie or fasten it on the near side as designed.
- Clip the snap carabiner of the closed reins to the rings on either side of the halter.
- Use the reins for in-hand work, ground schooling or leading, keeping a soft contact and releasing pressure as soon as the horse responds.
- Unclip the reins after work to use the halter on its own for everyday leading and handling.
- Check the rope, knots and carabiner for wear after use and store dry.
Browse more leading and handling kit in our headcollars and lead ropes collection.
FAQ
How long are the reins?
The closed reins measure approximately 3.15 m in length, which suits in-hand work and schooling from the ground.
Can the reins be removed?
Yes. The reins attach to rings on the halter with the included snap carabiner, so they can be clipped on and off in seconds, leaving a plain knotted halter for leading.
What size should I choose for my horse?
Rope halters are less adjustable than padded webbing headcollars, so size matters. Compare the size against a headcollar that already fits your horse well – pony, cob and full fittings differ considerably. Too large and the halter sits low on the nose; too small and the knots will not sit correctly on the cheeks.
Can I leave this halter on my horse in the field or stable?
No. A knotted rope halter has no breakaway point and should only be used under supervision while leading, handling or working your horse.
Is this suitable for lunging?
It is intended for groundwork, in-hand work and leading. For circle work on a long line, a dedicated lunge cavesson and lunge line give better control and distance.
How do I clean it?
Hand wash in cool water with a mild detergent and allow to dry naturally away from direct heat. Inspect the rope, knots and carabiner regularly and replace if worn.
About Waldhausen
Waldhausen is a long-established European equestrian brand supplying practical, hard-wearing equipment for the yard, stable and school. The range covers everyday essentials for horses, ponies and cobs, with an emphasis on straightforward designs built for daily use.