Lorina Fillis Stirrup Treads - Black Rubber, Pair
Description
Lorina Fillis Stirrup Treads - Black Rubber, Sold in Pairs
Lorina Fillis Stirrup Treads are black rubber replacement footbeds that sit in the base of Fillis-style stirrup irons, supplied as a matched pair. They are best for riders who want to restore grip and a defined foot platform to irons they already own, rather than buying a whole new set of stirrups.
Treads are a consumable part of your tack: daily riding, sand from the school and wet weather gradually wear the surface smooth and harden the rubber. Swapping in a fresh pair is one of the cheapest ways to improve how secure your foot feels in the stirrup.
Key Features
- Sold in pairs - one tread for each iron, so both stirrups match
- Black rubber for a traditional, discreet finish that suits most saddlery
- Shaped for Fillis-style irons, the most common English riding stirrup pattern
- Textured footbed helps keep the ball of the foot steady in the iron
- Simple to fit and replace - no tools or specialist equipment needed
- Useful spare for busy yards, riding schools and shared tack rooms
Specifications
| Brand | Lorina |
|---|---|
| Product type | Stirrup treads |
| Style | Fillis |
| Material | Rubber |
| Colour | Black |
| Quantity | Pair |
| Suitable for | Fillis-style stirrup irons |
How to Use
- Remove the stirrup irons from the leathers and take out the old treads.
- Wash out the base of each iron and dry it so grit does not sit under the new tread.
- Measure the internal width and length of the iron base and check it against the tread size.
- Flex the new tread slightly and push it into the base of the iron so it seats flat under the retaining lugs or bars.
- Press along the full length to confirm the tread is level with no lifted edges or sideways movement.
- Refit the irons to the leathers and check both treads before you mount.
Browse more riding hardware in our stirrups collection.
FAQ
Are these stirrup treads sold singly or as a pair?
They are sold as a pair, so you have one tread for each stirrup iron.
Will they fit any stirrup iron?
They are designed for Fillis-style irons. Iron dimensions vary between makes, so measure the internal width of the base of your stirrup and compare it with the tread size before ordering.
What are Lorina Fillis Stirrup Treads made from?
They are made from rubber and finished in black.
How do I know when to replace my stirrup treads?
Replace them once the grip pattern has worn smooth, the rubber has hardened or cracked, or the tread no longer sits tightly in the iron.
How should I clean them?
Rinse with clean water to remove sand, grit and mud, then let them dry naturally away from direct heat or radiators.
Why does my foot slip in the stirrup?
A worn, smooth or loose-fitting tread is a common cause. A correctly sized tread sits flat in the iron and gives the sole of your boot something to grip against.
About Lorina
Lorina makes practical, everyday saddlery for working yards, including bits, stirrups and replacement fittings. The range focuses on straightforward equipment that riders and riding schools can keep in regular use.