Majyk Equipe Glide XC Hind Boots for Horses
Description
Majyk Equipe Glide XC Hind Boots
The Majyk Equipe Glide XC Hind Boots are cross country hind leg protection built around the DRS Safety system, a chamfered outer guard shaped to glide across obstacles and reduce friction and contact. They suit event riders, cross country schoolers and anyone who wants technical hind protection with a cooler, neoprene-free liner.
The Glide XC is the result of three years of development. The flexible outer guard is lined with Majyk Equipe's ARTi-LAGE impact protection, and covered TPU straps keep adjustment quick and the strap ends tidy. Browse more horse boots to complete the set.
Key Features
- DRS Safety system: carefully chamfered guard designed to glide across obstacles, reducing friction and contact
- ARTi-LAGE impact protection: lines the flexible outer guard over the strike zone
- Neoprene-free foam liner: designed to help keep the horse's legs cool
- Covered TPU straps: easy adjustment with strap ends protected from brush
- Hind-specific shape: contoured for the hind cannon and fetlock
- Three years of development: built for comfort and technical performance
Specifications
| Brand | Majyk Equipe |
|---|---|
| Product | Glide XC Hind Boots |
| Leg Position | Hind |
| Outer Guard | Flexible chamfered DRS guard |
| Impact Lining | ARTi-LAGE |
| Liner | Neoprene-free foam |
| Fastening | Covered TPU straps |
| Best For | Cross country, eventing, schooling, jumping |
| Country of Origin | China |
How to Use
- Measure the hind cannon bone and check against the Majyk Equipe size chart before first use.
- Make sure the legs are clean and dry, and brush off any mud, sand or grit.
- Position the boot on the hind leg with the guard over the outside of the cannon, sitting clear of the fetlock joint.
- Fasten the TPU straps from the top down, firm enough that the boot cannot rotate but not tight enough to restrict the joint.
- Walk the horse for a few minutes, then re-check and adjust the straps before working.
- Remove after work, rinse off mud and allow to air dry away from direct heat.
FAQ
Are these front or hind boots?
These are hind boots and should only be fitted to the hind legs. The shaping and guard position are specific to the hind cannon and fetlock.
What is the DRS Safety system?
DRS refers to the carefully chamfered outer guard, which is designed to glide across obstacles so the boot reduces friction and contact rather than catching on a fence.
Do they contain neoprene?
No. The liner is a neoprene-free foam, chosen to help keep the horse's legs cooler than a traditional neoprene lining.
How should the boots fit?
The boot should sit clear of the fetlock joint and be snug enough that it cannot slip down or rotate during work, while still allowing the joint to flex. Sizing is the most common reason boots are returned, so measure the cannon bone and compare with the size chart before ordering.
How do I clean them?
Rinse off mud and grit after each use, wipe the liner and guard, then air dry naturally away from direct heat or sunlight.
When should they be replaced?
Check the guard, liner and straps regularly and replace the boots if the protective foam is compressed, split or damaged.
About Majyk Equipe
Majyk Equipe designs technical horse boots around its ARTi-LAGE impact protection foam, with an emphasis on shock absorption, breathability and low weight. The range is widely used by event riders and everyday schoolers who need protection that stands up to regular cross country work.