Agri Health Lamb Bucket Pull-Through Teats
Description
Agri Health Lamb Bucket Pull-Through Teats
The Agri Health Lamb Bucket Pull-Through Teats are replacement feeding teats for multi-teat lamb buckets and milk feeders. They fit by being pulled through the pre-drilled hole in the bucket wall so the flange seats flat on the inside, creating a secure, leak-resistant fit.
Best for shepherds, smallholders and hobby flock keepers rearing orphan, triplet or rejected lambs on milk replacer, and equally useful for kid goats. Fit a full set at the start of lambing, or swap individual teats as they wear through the season.
Key Features
- Pull-through design - the flange seats against the inside bucket wall to hold the teat firmly and limit leaks
- Flexible teat - supports a natural sucking action for lambs learning to feed from a bucket
- Cost-effective replacement - renew worn teats instead of buying a complete new feeder
- Washable - removable for cleaning between feeds
- Multi-species use - suitable for lambs and kid goats on milk replacer
- Yard-practical - straightforward to fit with wet hands in a busy lambing shed
Specifications
| Brand | Agri Health |
|---|---|
| Product | Lamb Bucket Pull-Through Teats |
| Type | Replacement feeding teat |
| Fitting method | Pull-through |
| Suitable for | Lambs, kid goats |
| Use with | Lamb feeding buckets with pull-through teat holes |
| Category | Agrihealth - lambing and rearing |
| Country of origin | China |
How to Use
- Wash the teats and the bucket in warm water with a suitable livestock detergent before first use.
- Wet the teat and the bucket hole to make fitting easier.
- Push the narrow end of the teat through the hole from the outside of the bucket.
- Pull firmly from inside the bucket until the flange sits flush against the inner wall.
- Check each teat is seated evenly, then fill with prepared milk replacer at the temperature stated by the milk powder manufacturer.
- Rinse and wash the teats after every feed, dry fully and inspect for splits or chew damage before the next use.
Browse more farm and livestock husbandry equipment in our Agrihealth collection.
FAQ
Will these teats fit my lamb bucket?
They are designed for buckets with pull-through teat holes. Measure the hole diameter on your existing feeder and compare it with your current teats before ordering, as hole sizes vary between bucket makes.
How do I fit a pull-through teat?
Wet the teat, push the narrow end through the hole from outside the bucket, then pull firmly from the inside until the flange sits flat against the bucket wall.
Can I use these for kid goats as well as lambs?
Yes. The teats suit lambs and kid goats being reared on milk replacer.
How often should teats be replaced?
Inspect them regularly and replace any teat that is split, torn, perforated or heavily chewed, as a damaged teat can let milk flow too quickly. Many shepherds fit a fresh set at the start of each lambing season.
How should I clean them?
Rinse after each feed and wash in warm water with a suitable dairy or livestock detergent, then allow to dry fully before reuse. Store clean and dry, out of direct sunlight.
Do they come with a bucket?
No. These are replacement teats only and do not include a feeding bucket.
About Agri Health
Agri Health supplies practical everyday husbandry equipment for farms, smallholdings and yards, spanning lambing, calving, rearing and general livestock care. The range focuses on hard-working, easily replaced items that keep routine jobs moving during busy seasons.