Agri Health Silage Tape Patches for Bale Wrap Repair
Description
Agri Health Silage Tape Patches - Fast Repairs for Bale Wrap and Clamp Sheets
Agri Health Silage Tape Patches are self-adhesive repair patches used to seal holes, punctures and small tears in silage bale wrap, silage sheets and clamp covers. They are made for farmers, smallholders and yard owners who store forage in wrapped bales or under a clamp sheet and want to reseal damage quickly before air gets into the crop.
Best for on-the-spot repairs when walking bales or checking a clamp: no tools, no heat and no mixing - simply clean, peel and press. Keep a supply in the truck or feed room alongside your other yard and stable essentials.
Key Features
- Self-adhesive patches for sealing holes in silage bale wrap and clamp sheeting
- Helps limit air ingress into stored forage, supporting feed quality in storage
- Repairs damage from birds, vermin, stubble, thorns and loader handling
- Quick to apply in the field - no tools required
- Overlap multiple patches to cover longer splits and tears
- Convenient size to carry when inspecting bales or clamps
- Made in Italy
Specifications
| Brand | Agri Health |
|---|---|
| Product | Silage Tape Patches |
| Type | Self-adhesive repair patches |
| Typical Uses | Silage bale wrap, silage sheets, clamp and silo covers |
| Suitable For | Farms, smallholdings, livery yards |
| Country of Origin | Italy |
How to Use
- Inspect bales or clamp sheeting regularly and mark any holes or tears you find.
- Wipe the area around the damage so it is as clean and dry as conditions allow.
- Peel the backing from a patch, keeping your fingers off the adhesive face.
- Press the patch centrally over the hole and smooth outwards so the edges bed down fully.
- For longer splits, overlap further patches along the tear until it is fully covered.
- Re-check repairs after a few days, especially following wet or windy weather.
FAQ
What are silage tape patches used for?
They are used to seal holes, punctures and small tears in silage bale wrap, silage sheets and clamp covers, helping to keep air out of stored forage.
How do I apply the patches?
Clean and dry the area as best you can, peel the backing and press the patch firmly over the hole, smoothing outwards from the centre.
Can I use them on a clamp sheet as well as round bales?
Yes. They are intended for silage bale wrap, silage sheeting and clamp or silo covers.
What if the tear is longer than one patch?
Overlap two or more patches along the length of the split so the whole tear is covered with no gaps.
Will they stick to a wet or dirty bale?
Adhesion is always best on a clean, dry surface. Wipe the area first and, where possible, patch in dry conditions, then check the repair a few days later.
How should the patches be stored?
Keep them somewhere dry and out of direct sunlight so the adhesive stays in good condition until needed.
About Agri Health
Agri Health produces practical consumables for livestock, forage and general yard management. The range focuses on simple, hard-wearing items that work in real farm conditions, from bale and clamp maintenance to everyday stock keeping tasks.