Agri Health Yard Scraper Spare Rubber Replacement Blade
Description
Agri Health Yard Scraper Spare Rubber - Replacement Blade for Stable Yards
The Agri Health Yard Scraper Spare Rubber is a replacement rubber blade that fits onto an existing Agri Health yard scraper head. It is for yard owners, grooms and livery staff who want to renew a worn scraper edge rather than buy a whole new tool.
Yard scrapers wear fastest at the rubber, where constant contact with concrete rounds off the edge and leaves water behind. Fitting a fresh blade restores a straight, flat contact line so wash-down water, rainwater and slurry move in fewer passes.
Key Features
- Genuine spare part: Replacement rubber for the Agri Health yard scraper
- Rubber construction: Flexible edge that follows the contours of concrete and hard standing
- Best for: Wash bays, stable floors, barn aisles, concrete yards and hard-surfaced walkways
- Economical: Renews the working part of the tool instead of replacing the complete scraper
- Quick to fit: Swaps onto the existing scraper head
- Blade only: Handle and scraper head are not included
Specifications
| Brand | Agri Health |
|---|---|
| Product Type | Yard scraper spare rubber |
| Material | Rubber |
| Sold As | Replacement blade only |
| Suitable Surfaces | Concrete, hard standing, wash bay and stable flooring |
| Typical Uses | Scraping water, wash-down water, slurry and debris |
| Country of Origin | Pakistan |
How to Use
- Remove the worn rubber from the scraper head, keeping any fixings to one side.
- Clean the channel or clamp on the head so the new rubber seats flat.
- Slide or fit the spare rubber into place, keeping it level along its full length.
- Refit and tighten the fixings evenly so the blade cannot twist in use.
- Test on a wet surface, pulling the scraper towards you in overlapping strokes.
- Rinse and hang the scraper after use so the edge stays straight.
Browse more yard kit in our stable and yard equipment collection.
FAQ
Does this spare rubber include a handle or scraper head?
No. This is the replacement rubber blade only. The handle and scraper head are not supplied.
How do I know if it will fit my scraper?
Measure the width of your existing scraper head and the worn rubber before ordering, as yard scrapers are produced in several widths. It is designed as a spare for the Agri Health yard scraper.
What surfaces is it suitable for?
It is intended for concrete and other hard standing, including wash bays, barn aisles, stable floors and yard walkways.
How often should the rubber be replaced?
Replace it when the edge becomes rounded, split or uneven and the scraper starts leaving water behind. Daily use on rough concrete wears rubber faster than occasional use.
How should I look after the blade?
Rinse it after contact with slurry or disinfectant and store the scraper hanging up, or with the blade off the ground, so the rubber does not set into a curve.
Can it be used for snow or bedding as well as water?
It is designed primarily for moving water and slurry, but it will also push light snow and loose debris on a smooth hard surface.
About Agri Health
Agri Health supply practical, hard-wearing equipment for equestrian yards and farms, from mucking-out tools to yard maintenance kit. Keeping spare parts available means everyday tools can be repaired and kept in service rather than thrown away.