Beris Hard Tongue Port Long Shank Pelham Bit
Description
Beris Hard Tongue Port Long Shank Pelham Bit
The Beris Hard Tongue Port Long Shank Pelham is a leverage bit with a 30mm raised tongue port, an 18mm thick mouthpiece and 7.5cm shanks. It is made in Germany and is best for riders who want clearer, more refined rein aids for schooling, hacking, hunting or jumping.
Because it is a Pelham, it combines snaffle and curb action in one mouthpiece and can be ridden with double reins or with Pelham roundings and a single rein. The port gives room over the tongue and encourages the pressure to be shared across the bars and tongue rather than concentrated in one place.
Key Features
- 30mm tongue port creating clearance over the tongue
- 7.5cm shank length for curb leverage and a defined signal
- 18mm mouthpiece thickness for a stable, consistent feel
- Hard mouthpiece construction for a clear, unyielding contact
- Pelham format suited to two reins or Pelham roundings
- Made in Germany to precise dimensions
Specifications
| Brand | Beris |
|---|---|
| Product type | Pelham bit, long shank |
| Mouthpiece style | Hard tongue port |
| Shank length | 7.5cm |
| Tongue port height | 30mm |
| Mouthpiece thickness | 18mm |
| Rein options | Double reins or Pelham roundings |
| Country of origin | Germany |
How to Use
- Measure the mouthpiece width of a bit your horse already wears comfortably, taking the measurement inside cheek to inside cheek.
- Choose the matching width, allowing roughly 3-5mm clearance either side of the lips.
- Fit the bit so it rests at the corners of the mouth without pulling deep wrinkles, and check the port sits centrally over the tongue.
- Attach a curb chain and adjust it so it lies flat in the chin groove and engages when the shank rotates to around 45 degrees.
- Ride with two reins, or fit Pelham roundings if you prefer a single rein, and introduce the bit in a familiar arena before hacking or competing.
- Rinse and dry the mouthpiece after every ride and inspect for wear before storing.
Browse more options in our horse bits collection.
FAQ
What does the tongue port on this Beris Pelham do?
The 30mm port creates space over the tongue, so pressure is distributed across the tongue and bars rather than sitting on the tongue alone. Many horses that dislike constant tongue pressure go more settled in a ported mouthpiece.
How long are the shanks and what difference does that make?
The shanks measure 7.5cm. A longer shank increases the leverage applied through the curb rein, which gives a more defined signal from a lighter hand. It is best suited to riders with a steady, independent contact.
Can I ride this Pelham with one rein?
Yes. Fitting Pelham roundings lets you use a single rein, which is common for hunting and jumping. Two reins give you more separate control over the snaffle and curb action.
What size bit should I order?
Measure your horse's current bit from the inside of one cheek to the inside of the other and match that width. Most full-size horses take 12.5cm to 13.5cm, cobs around 12.5cm and ponies 10cm to 12cm, but always measure rather than assume.
Does this bit need a curb chain?
Yes. A Pelham relies on a curb chain to work correctly. It should lie flat in the chin groove and engage as the shank rotates, not before.
How do I care for the bit?
Rinse it in clean water after each ride to remove saliva and feed, dry it with a soft cloth and store it somewhere dry. Check regularly for sharp edges, wear or distortion and retire the bit if you find any.
About Beris
Beris is a German bit manufacturer known for precisely dimensioned mouthpieces and careful finishing. The range covers a broad choice of ports, thicknesses and cheek styles so riders can match a mouthpiece to the individual horse.