Beris Medium Bar Eggbutt Snaffle Bit 18mm
Description
Beris Medium Bar Eggbutt Snaffle Bit - 18mm Mouthpiece
The Beris Medium Bar Eggbutt Snaffle is a German-made everyday bit with an 18mm mouthpiece and fixed eggbutt cheek rings. It is best for horses and ponies in general work - flatwork, schooling, hacking and in-hand exercise - where the rider wants a steady, consistent contact.
Because the rings are fixed rather than loose, the bit cannot slide through the mouth and is less likely to pinch the corners of the lips, which makes it a sensible choice for young or sensitive horses as well as established riding horses. You can see the wider range in our horse bits collection.
Key Features
- 18mm mouthpiece: a medium bar thickness suited to everyday ridden work
- Eggbutt cheeks: fixed rings for a stable, non-pinching action
- Steady contact: the bit stays in position rather than moving through the mouth
- Versatile use: flatwork, schooling, hacking, lunging in-hand and general riding
- German made: produced by bit specialist Beris
Specifications
| Brand | Beris |
|---|---|
| Product Type | Eggbutt snaffle bit |
| Mouthpiece | Medium bar, 18mm thick |
| Cheek Type | Eggbutt (fixed rings) |
| Suits | Horses and ponies in general work |
| Country of Origin | Germany |
How to Use
- Measure your horse's current bit from the inside of one ring to the inside of the other, or use a bit measurer, to confirm the correct mouthpiece width.
- Attach the bit to your bridle cheekpieces with the rings facing outwards and the mouthpiece curving in line with the mouth.
- Bridle up and check the bit sits level, with a small amount of clearance between the mouthpiece and each corner of the lips.
- Adjust the cheekpieces so the bit rests comfortably without dragging up into the corners or hanging low against the teeth.
- Ride in walk first and assess the horse's acceptance of the contact before progressing to trot and canter.
- Rinse the mouthpiece in clean water after each ride and dry it before storing.
FAQ
How thick is the mouthpiece on this Beris bit?
The mouthpiece is 18mm thick, which is a medium bar thickness suited to general everyday riding.
What is the advantage of an eggbutt snaffle over a loose ring?
The rings on an eggbutt are fixed to the mouthpiece, so the bit stays still in the mouth and is less likely to pinch the corners of the lips. Loose rings move more and encourage mouthing, which some horses prefer and others do not.
What size bit should I order for my horse?
Always measure rather than guess. Measure your horse's existing bit from the inside of one ring to the inside of the other, or use a bit measurer. As a broad guide many ponies take 4.5in to 5in and many full-size horses take 5in to 5.5in, but cobs, natives and warmbloods vary widely.
Is this bit suitable for a young horse?
The fixed, stable action of an eggbutt makes it a common choice for young and sensitive horses in early ridden work, provided the mouthpiece width and height are correct for the individual.
How do I care for the bit?
Rinse in clean water after every ride to remove saliva and feed, dry thoroughly, and check the rings and mouthpiece regularly for wear or sharp edges. Replace the bit if you find any damage.
Where is this bit made?
Beris is a German manufacturer and this bit's country of origin is Germany.
About Beris
Beris is a German bit specialist known for focusing on mouthpiece shape, thickness and finish to encourage a soft, consistent contact. The brand's eggbutt snaffles are a long-standing choice for everyday schooling and hacking.