Beris Soft Tongue Port Full Cheek Snaffle Bit
Description
Beris Soft Tongue Port Full Cheek Snaffle Bit
The Beris Soft Tongue Port Full Cheek Snaffle is a German-made horse bit with a soft, raised tongue port mouthpiece measuring 30mm in port height and 18mm in thickness. It is designed for riders who want to give the tongue extra room while keeping a steady, clear contact.
It is best for everyday flatwork, schooling and hacking, and is particularly suited to horses that are fussy about tongue pressure or benefit from the extra shoulder and turning support that full cheeks provide. Browse more options in our horse bits collection.
Key Features
- 30mm tongue port creates room over the tongue rather than pressing flat across it
- 18mm mouthpiece thickness spreads the feel over a wider surface
- Full cheek arms lie along the face to support lateral and turning aids
- Cheeks help prevent the bit sliding through the mouth
- Suitable for schooling, flatwork, hacking and in-hand work
- Made in Germany by bit specialist Beris
Specifications
| Brand | Beris |
|---|---|
| Product type | Full cheek snaffle bit |
| Mouthpiece | Soft tongue port |
| Tongue port height | 30mm |
| Bit thickness | 18mm |
| Suitable for | Horse, pony, cob, warmblood |
| Country of origin | Germany |
How to Use
- Measure your horse's mouth width, or measure a bit that already fits well, before choosing a size.
- Fit the bit to your bridle and adjust the cheekpieces so it sits evenly in the mouth without dragging up into the corners.
- Check there is a small amount of clearance either side of the lips so the mouthpiece does not pinch.
- If using bit keepers, attach them to the upper cheek arms to stabilise the bit and keep the arms clear of the face.
- Introduce the bit in a quiet schooling session before using it out hacking or at a competition.
- Rinse in clean water after each ride, dry, and inspect for wear before storing.
FAQ
What does a tongue port do on a bit?
A tongue port is a raised arch in the centre of the mouthpiece. It creates space above the tongue so pressure is shared more across the bars and less directly on the tongue. This Beris bit has a 30mm port height.
Why choose a full cheek rather than a loose ring?
The straight arms of a full cheek rest against the sides of the face and press gently as the rein is used, which many riders find helpful for turning and lateral work. The arms also stop the bit being pulled through the mouth.
How do I get the size right?
Measure the width of your horse's mouth, or measure a bit that already fits, and allow a little clearance either side of the lips. Wrong sizing is the most common reason bits are returned, so check before ordering and ask an instructor or qualified bit fitter if you are unsure.
Is an 18mm mouthpiece thick or thin?
At 18mm it is a fairly substantial mouthpiece, which spreads the feel over a wider area. Horses with shallow mouths or little space between the tongue and palate may prefer a thinner option.
Can I use this bit in competition?
Permitted bits vary by discipline and governing body. Always check the current rulebook for your discipline before competing in any bit.
How should I care for the bit?
Rinse it in clean water after every ride and dry it before storage. Check the mouthpiece, arms and rings regularly for wear or rough edges and replace the bit if you find damage.
About Beris
Beris is a German bit manufacturer specialising in shaped, anatomically considered mouthpieces and careful finishing. The range focuses on giving horses room for the tongue while keeping the rider's contact clear and consistent.