Beris Soft Tongue Port Gag Bit for Horses
Description
Beris Soft Tongue Port Gag Bit
The Beris Soft Tongue Port Gag is a German-made gag bit with a soft tongue port mouthpiece, featuring a 30mm port height and an 18mm thick mouthpiece. It is designed for riders who want tongue relief combined with the lift and poll engagement of a gag cheek, and it suits schooling, flatwork and hacking.
The raised port creates room over the tongue so pressure is shared across the bars, while the generous 18mm mouthpiece spreads that pressure over a wider surface rather than concentrating it. It is best for horses that fuss with a straight or thin mouthpiece and carry a full tongue, and it is a useful option where a rider wants a clearer upward aid without moving to a stronger curb arrangement. Browse more options in our horse bits collection.
Key Features
- Soft tongue port: 30mm port height gives the tongue space within the mouthpiece
- 18mm mouthpiece: a thicker profile that distributes pressure over a broader bearing surface
- Gag cheek action: adds lift and poll engagement through the rein
- Versatile use: suitable for schooling, flatwork, hacking and general ridden work
- German manufacture: made in Germany by Beris
Specifications
| Brand | Beris |
|---|---|
| Product type | Gag bit, soft tongue port mouthpiece |
| Tongue port height | 30mm |
| Mouthpiece thickness | 18mm |
| Suitable for | Horse, pony, cob, warmblood (subject to correct width) |
| Country of origin | Germany |
How to Use
- Measure your horse's current bit from the inside of one ring to the inside of the other to confirm the correct width.
- Fit the bit to the bridle and adjust the cheekpieces so the mouthpiece sits level and comfortably in the mouth.
- Check for a small amount of clearance either side of the lips, with no pinching at the corners.
- Introduce the bit in a familiar setting, starting with light flatwork before progressing to faster or more demanding work.
- Rinse the mouthpiece in clean water after each ride and dry it before storing.
FAQ
What is a tongue port bit and what does it do?
A tongue port is a raised section in the centre of the mouthpiece. On this Beris bit the port measures 30mm high, which creates space over the tongue so pressure is shared more across the bars of the mouth rather than sitting solely on the tongue.
How thick is the mouthpiece?
The mouthpiece is 18mm thick. A thicker mouthpiece spreads pressure across a wider surface, though it needs adequate room in the mouth, so horses with a shallow palate or narrow jaw may prefer a slimmer design.
What is the difference between a gag and a snaffle?
A gag uses a cheek arrangement that allows the bit to slide upwards in the mouth under rein pressure, adding lift and poll engagement. A snaffle acts directly with no upward sliding action.
What size bit do I need?
Measure your horse's existing bit from the inside of one ring to the inside of the other and match that measurement. Correct width is the most common reason bits are returned, so check before ordering rather than estimating by horse type.
Is this bit suitable for ponies and cobs?
Yes, provided the width suits the individual horse. The 18mm mouthpiece is on the substantial side, so smaller ponies with limited mouth space may be more comfortable in a thinner mouthpiece.
How do I care for the bit?
Rinse in clean water after every ride to remove saliva and feed, dry it thoroughly and store it somewhere dry. Inspect the mouthpiece, cheeks and rings regularly and retire any bit showing cracks, sharp edges or distortion.
About Beris
Beris is a German bit manufacturer specialising in mouthpieces shaped around tongue comfort and clear rein contact. Beris bits are made in Germany.