Beris Soft Tongue Port Kimblewick Bit for Horses
Description
Beris Soft Tongue Port Kimblewick Bit
The Beris Soft Tongue Port Kimblewick is a German-made curb bit with a 30mm soft tongue port and an 18mm thick mouthpiece, designed to create space for the tongue while spreading pressure across a wider area of the bars. It is best for riders who want more control than a snaffle offers on a single rein, whether hacking a forward-going horse, schooling at home or riding at pony club.
Like all Kimblewicks, it has a D-shaped cheek with slotted rings, so the rein position can be raised or lowered to adjust how much curb action is applied, and it is used with a curb chain.
Key Features
- 30mm soft tongue port giving room for the tongue to sit
- 18mm mouthpiece thickness for a broad, even bearing surface on the bars
- Kimblewick cheek with slotted rings for two rein positions and adjustable curb effect
- Single rein curb bit - more control than a snaffle without the complexity of a double bridle
- Suitable for hacking, schooling, jumping, cross country and pony club
- Made in Germany by bit specialist Beris
Specifications
| Brand | Beris |
|---|---|
| Product type | Kimblewick curb bit |
| Mouthpiece | Soft tongue port |
| Tongue port height | 30mm |
| Mouthpiece thickness | 18mm |
| Cheek | D-shaped Kimblewick with slotted rings |
| Rein set up | Single rein, used with a curb chain |
| Country of origin | Germany |
Browse more options in our horse bits collection.
How to Use
- Measure your horse's current bit from the inside of one cheek to the inside of the other to confirm the correct width before fitting.
- Attach the bit to the bridle cheek pieces so the mouthpiece sits level in the mouth, just touching or lightly wrinkling the corners of the lips.
- Fit a curb chain to the hooks and twist it flat, adjusting it so it engages at around 45 degrees of rein contact.
- Choose the rein slot: the upper position gives a milder action, the lower slot increases curb leverage.
- Introduce the bit in a familiar arena or school first, riding with a light, steady contact before hacking out or competing.
- Rinse in clean water after every ride, dry thoroughly and check for wear before the next use.
FAQ
What is a Kimblewick bit used for?
A Kimblewick is a curb bit ridden on a single rein. It gives more control and a degree of poll and curb pressure compared with a snaffle, which is why it is popular for hacking strong horses, jumping, cross country and pony club riding.
What does the tongue port do?
The 30mm port is a raised arch in the centre of the mouthpiece. It creates space for the tongue so pressure is shared with the bars of the mouth, which many horses that dislike direct tongue pressure find easier to accept.
Is an 18mm mouthpiece thick or thin?
At 18mm this is a substantial mouthpiece. A thicker bit spreads pressure over a wider area, although horses with a small mouth or thick tongue may have less room, so check that the mouth closes comfortably around it.
Do I need a curb chain with this bit?
Yes. A Kimblewick is a curb bit and should be ridden with a curb chain fitted to the hooks, adjusted so it comes into play at roughly 45 degrees of rein contact.
How do I choose the right bit size?
Sizing is the most common reason bits are returned. Measure an existing well-fitting bit from the inside of one cheek to the inside of the other, or have a qualified bit fitter measure your horse's mouth. The mouthpiece should sit without pinching the lips or sliding through the mouth.
How should I clean and check the bit?
Rinse in clean water after each ride and dry it. Inspect the mouthpiece, rings and curb hooks regularly for wear or sharp edges and replace the bit if you find any damage.
About Beris
Beris is a German bit manufacturer specialising in shaped, anatomically considered mouthpieces. Bits are made in Germany with a focus on comfort in the horse's mouth and clean, carefully finished detailing.