Freejump Pro Grip Stirrup Leathers for SOFT'UP Stirrups

Freejump Pro Grip Stirrup Leathers — Quick-Fit Grip for SOFT'UP Stirrups

The Freejump Pro Grip Stirrup Leathers are extra-wide, single-strap vegetable-tanned leathers made specifically for Freejump SOFT'UP PRO+ and SOFT'UP LITE stirrups. They are best for riders who want fast fitting, close contact and a stable lower leg, thanks to a nylon quick-fit loop and an internal Velcro face that takes replaceable Leather or Grip Pads.

Because the leather is a single strap rather than a folded doubled design, it sits flat under the calf and resists rolling, while length adjustment at the top of the leather lets you match your usual stirrup position exactly.

Key Features

• Made for SOFT'UP stirrups: Exclusively designed for SOFT'UP PRO+ and SOFT'UP LITE for a precise, seamless fit.
• Nylon quick-fit loop: Slides into the open stirrup eye without removing the stirrup from the saddle.
• Vegetable-tanned leather: Durable, natural feel with a classic appearance.
• Extra-wide single strap: Added comfort under the leg and less rolling.
• Adjustable length: Fine-tuned from the upper part of the leather.
• Internal Velcro grip: Accepts a Leather Pad or Grip Pad for improved leg fixity.
• Replaceable pads: Swap worn pads to restore grip without replacing the leathers.
• Close contact: Grip with no added bulk between boot and saddle.

Specifications

Browse more stirrup and saddle accessories in our stirrups collection.

How to Use

1. Measure your current leathers from buckle to your usual hole so the new pair matches your established stirrup length.
2. Leave the SOFT'UP stirrup attached to the saddle and feed the nylon quick-fit loop through the open stirrup eye.
3. Secure the loop and run the strap up through the stirrup bar as normal.
4. If using a Leather Pad or Grip Pad, press it onto the internal Velcro face before mounting.
5. Set the length using the upper part of the leather, then check both sides match before riding.
6. Check the stitching, holes and nylon loop before each ride and replace any pad once the grip surface is worn.

FAQ

Which stirrups do these leathers fit? They are designed exclusively for Freejump SOFT'UP PRO+ and SOFT'UP LITE stirrups, which have an open stirrup eye that accepts the nylon quick-fit loop.

Do I have to remove the stirrup from the saddle to fit them? No. The nylon loop slides into the open eye with the stirrup still on the saddle, which is why fitting is so quick.

What is the internal Velcro for? It holds a Freejump Leather Pad or Grip Pad against the inner face of the leather to improve leg fixity in training and competition. The pads can be peeled off and replaced when worn.

Will the wide single strap feel bulky under my leg? The single-strap design avoids the doubled thickness of traditional leathers, so it lies flat against the saddle flap and supports close contact while helping prevent rolling.

What length should I choose? Measure your existing leathers from the buckle to the hole you normally ride on and pick the closest length, as the upper part of the leather allows fine adjustment either side of that setting.

How do I care for them? Wipe clean after use, condition occasionally with a suitable leather product, and inspect the stitching, holes and loop regularly, replacing the leathers if damage appears.

About Freejump

Freejump develops technical equipment focused on rider position, close contact and comfort, and is best known for its SOFT'UP stirrup range. The Pro Grip Stirrup Leathers extend that thinking with vegetable-tanned leather, a quick-fit nylon loop and an interchangeable Velcro grip pad system.