Hiko Bucket Bar Washer Replacement Stable Fitting
Description
Hiko Bucket Bar Washer - Replacement Yard Fitting
The Hiko Bucket Bar Washer is a single replacement washer for the Hiko bucket bar system, sitting between the bar and its fixing to keep the assembly tight. It is best for yard owners, liveries and equestrian property managers who need a spare part to bring a loose or incomplete bucket bar back into service.
Small fittings like this are easily lost during mucking out or when a bucket bar is moved between stables, so keeping spares in the tack room saves a bar being taken out of use. Made in Germany as part of the Hiko stable hardware range.
Key Features
- Genuine spare: replacement washer for the Hiko bucket bar
- Secure assembly: helps the bar sit snugly on its fixing and reduces play in use
- Tool-free fitting: slides onto the fixing as the bar is assembled
- Daily-use environments: suits stables, barns, field shelters and wash bays
- Sold individually: buy one or several to keep as yard spares
- German-made: part of the Hiko stable and yard hardware range
Specifications
| Brand | Hiko |
|---|---|
| Product | Bucket Bar Washer |
| Type | Replacement fitting / spare part |
| Compatibility | Hiko bucket bar |
| Quantity | Sold individually |
| Country of origin | Germany |
| Use | Stable, barn, field shelter and yard |
How to Use
- Remove the bucket and loosen the existing bucket bar fixing.
- Take off the old or damaged washer if one is still in place.
- Slide the new Hiko washer onto the fixing in the same position.
- Reassemble the bucket bar and tighten the fixing until the bar is firm with no rocking.
- Hang the bucket, fill it, and check the bar holds steady before leaving the stable.
- Re-check the fixing during routine yard maintenance and rinse off feed residue when cleaning.
Browse more stable and yard equipment in our stable and yard equipment collection.
FAQ
What is the Hiko Bucket Bar Washer for?
It is a replacement washer for the Hiko bucket bar. It sits between the bar and its fixing so the assembly stays tight when a bucket is hung, filled and lifted off.
Is it sold singly or in a pack?
It is sold individually as a single washer. If you look after several stables, order one per bucket bar you want to service and keep a spare in the tack room.
Will it fit other bucket bars?
It is intended for the Hiko bucket bar system. Other manufacturers' bars may use different sizes, so compare it with your existing fitting before ordering.
Do I need tools to fit it?
No specialist tools are needed for the washer itself, as it slides onto the fixing. You may need a basic spanner or screwdriver to loosen and retighten the bucket bar fixing.
How often should the washer be replaced?
Replace it whenever it is damaged, distorted or missing, or if the bucket bar starts to move on its fixing despite being tightened.
Where is it made?
Hiko stable and yard hardware is made in Germany.
About Hiko
Hiko manufactures stable and yard hardware for equestrian premises in Germany, with a range built around practical, serviceable fittings. Because individual components such as washers are available separately, yards can maintain and repair existing equipment rather than replacing a whole bucket bar.