Liscop A106 Cattle Cutter & Comb Clipping Blade Set
Description
Liscop A106 Cutter & Comb Set — Standard Cattle Clipping Blades
The Liscop A106 is a standard cutter and comb blade set for clipping cattle, leaving 3mm of hair. It is made for farmers and stockpeople clipping dirty cattle, where coats are heavier and soiled and a hard-wearing working blade is needed rather than a fine show blade.
Important compatibility note: the A106 set will not fit Liscop 3000 or Liscop 4000 machines, so check your clipper model before ordering.
Key Features
- Matched pair: supplied as a cutter and comb set, ready to fit
- 3mm finish: leaves 3mm hair, a practical working length for cattle
- Built for dirty coats: the standard specification for soiled cattle clipping
- Easy reordering: clearly referenced as Liscop A106
- Compatibility stated: not suitable for Liscop 3000 or 4000 machines
Specifications
| Brand | Liscop |
|---|---|
| Product code | A106 |
| Product type | Cutter and comb set |
| Cut length | Leaves 3mm hair |
| Best for | Clipping dirty cattle |
| Not compatible with | Liscop 3000 and Liscop 4000 machines |
| Country of origin | XU |
How to Use
- Check your clipper model first — this set does not fit Liscop 3000 or 4000 machines.
- Switch off and disconnect the machine before changing blades.
- Remove the old cutter and comb and brush away any packed hair and debris.
- Seat the new comb on the machine head, then fit the cutter above it so the cutting surfaces mate squarely.
- Tension the blades to your machine manufacturer's recommendation — over-tensioning causes heat and premature wear.
- Oil the blades before starting and at regular intervals while clipping, and allow the set to cool if it becomes hot.
- After use, brush clean, oil lightly and store dry.
Browse more livestock and yard equipment in our stable and yard equipment collection.
FAQ
What length of hair does the Liscop A106 leave?
It leaves 3mm of hair, a standard working length for cattle rather than a close show finish.
Will the A106 fit a Liscop 3000 or 4000 machine?
No. This set will not fit Liscop 3000 or 4000 machines. Confirm your machine model before ordering.
Is the A106 sold as a cutter and comb together?
Yes, it is supplied as a cutter and comb set.
Is it suitable for dirty cattle?
Yes. It is a standard cutter and comb set intended for clipping dirty cattle.
How do I look after the blades?
Brush out hair after each session, oil regularly during use, store the set dry, and have the cutter and comb resharpened as a pair when the cut begins to drag.
Can I use it on horses?
The A106 is specified for cattle clipping and leaves 3mm hair. Horse owners generally choose blades designed for equine clipper heads and coat types.
About Liscop
Liscop supply clipping machines and blade sets used across farms and livestock units. Blades are consumable items designed to be cleaned, oiled and resharpened as a matched pair to keep cutting cleanly season after season.