Liscop A5 Cutter Only Replacement Clipper Blade
Description
Liscop A5 Cutter Only - Replacement Clipper Cutter
The Liscop A5 Cutter Only is a single replacement cutter for A5-type clipper blade sets - the moving upper blade that runs against a fixed comb. It is for anyone clipping horses, ponies or dogs with A5-fitting clippers who wants to renew a worn cutter instead of replacing the whole blade pair.
Because the cutter does most of the work, it is normally the first part of a blade set to lose its edge. Buying the cutter on its own is a practical way to keep spare sets running through a busy clipping season. The comb is not included.
Key Features
- Cutter only - the moving blade of an A5 blade pair, supplied without a comb
- A5 fitting - pairs with matching A5 combs on compatible clippers
- Economical - refresh a blade set rather than buy a complete new pair
- Yard practical - a useful spare for clipping season and grooming rooms
- Liscop - part of the Liscop clipper and blade range
See more clipping kit in our horse clippers and blades collection.
Specifications
| Brand | Liscop |
|---|---|
| Product | A5 Cutter Only |
| Type | Replacement clipper cutter (moving blade) |
| Fitting | A5 type |
| Comb included | No |
| Suitable for | Horse, pony and dog clipping with A5-fitting clippers |
| Category | Agrihealth |
| Country of origin | United Kingdom |
How to Use
- Switch the clipper off and disconnect it from the power supply.
- Remove the existing blade set and take off the worn cutter.
- Brush out packed hair and old grease from the blade seat, hinge and locating points.
- Seat the new A5 cutter against the comb so the locating points engage correctly.
- Refit the blade set to the clipper and set tension as described in your clipper handbook.
- Apply a few drops of blade oil, run briefly, then wipe away the excess before clipping.
FAQ
Does this include the comb? No. This is the cutter only - the moving upper blade. You will need a matching A5 comb to make a complete blade pair.
What is the difference between the cutter and the comb? The comb is the fixed lower blade that sits against the coat, and the cutter is the moving upper blade that slides across it. The cutter usually dulls first, which is why it is sold separately.
Which clippers does an A5 cutter fit? It is designed for A5-type blade sets used on A5-fitting clippers. Check your clipper handbook and existing blades for the A5 designation before ordering.
Can I use it for dog grooming as well as horses? Yes. A5-fitting clippers are widely used for both horse clipping and dog grooming, so the cutter suits either application.
How do I look after the cutter? Brush hair away after every session, oil regularly while clipping, wipe dry and store flat in a dry place to help prevent corrosion.
How do I know when a cutter needs replacing? If the clipper drags, leaves tramlines or needs repeated passes despite being clean, oiled and correctly tensioned, the cutter has usually lost its edge.
About Liscop
Liscop makes clippers, blades and clipping accessories for equestrian, agricultural and animal grooming use. The range focuses on serviceable, replaceable parts so working machines can be maintained rather than replaced.