Mackey Rubber Curb Chain Guard 30cm for Horses
Description
Mackey Rubber Curb Chain Guard - Comfort Under The Chin Groove
The Mackey Rubber Curb Chain Guard is a 30cm rubber sleeve that threads onto a curb chain so the chain does not sit directly against the horse's chin groove. It is best for riders using a Pelham, Weymouth, double bridle or Kimblewick whose horse is sensitive or prone to rubbing in the curb area.
By spreading curb pressure over a smooth, wider surface rather than individual metal links, the guard makes curb action more comfortable without changing how the bit is fitted or adjusted. It is a low-cost, easily replaced item that lives permanently on the bridle or moves between bits as needed. Browse more bits and bitting accessories to complete your set-up.
Key Features
- Rubber sleeve that cushions the curb chain against the chin groove
- 30cm length covers the working section of a standard curb chain
- Helps reduce chafing and rubbing on sensitive horses
- Suits Pelham, Weymouth, double bridle and Kimblewick curb chains
- Threads on quickly and slides into position under the jaw
- Wipe-clean and simple to replace when worn
- Suitable for horses, cobs and ponies
Specifications
| Brand | Mackey |
|---|---|
| Product Type | Curb chain guard |
| Length | 30cm |
| Material | Rubber |
| Colour | Black |
| Compatible With | Pelham, Weymouth, double bridle, Kimblewick |
| Sold As | Single guard (curb chain not included) |
| Country of Origin | Pakistan |
How to Use
- Unhook the curb chain from one side of the bit.
- Thread the free end of the chain through the rubber guard.
- Re-hook the chain, keeping the links flat and untwisted.
- Slide the guard so it sits centrally over the chin groove.
- Adjust the chain length so it engages when the bit cheek rotates to roughly 45 degrees.
- Check the position and the condition of the rubber every time you tack up.
FAQ
What does a curb chain guard do?
It sits between the curb chain and the horse's chin groove, spreading the pressure of the chain across a smooth rubber surface instead of individual links, which helps reduce rubbing.
Will a 30cm guard fit my curb chain?
30cm covers the central working section of a standard curb chain used on Pelhams, Weymouths and double bridles. The end links stay exposed so the chain can still be hooked and twisted flat.
Does it change how I fit the curb chain?
No. Fit and adjust the chain as normal so it engages when the bit cheek rotates to approximately 45 degrees. Re-check the length after fitting the guard, as the rubber takes up a little slack.
Can I use it on a Kimblewick?
Yes. It suits any bit that uses a conventional curb chain, including Kimblewicks, Pelhams, Weymouths and double bridles.
How do I clean it?
Wipe with warm water, remove grease and grime, then air dry away from direct heat. Avoid harsh solvents, which can degrade rubber.
When should I replace it?
Replace the guard if the rubber splits, hardens, thins or no longer stays in position over the chin groove.
About Mackey
Mackey make practical, everyday equestrian equipment for yard, schooling and competition use. Their saddlery accessories focus on straightforward, functional designs that solve common problems around the stable and in the school.