Mackey Shaped Waffle Girth for Horses

Mackey Shaped Waffle Girth - Anatomic Comfort For Everyday Riding

The Mackey Shaped Waffle Girth is an anatomically shaped horse girth with a breathable waffle surface, elastic at both ends and built-in rings for martingales and training aids. It is best for riders who want a comfortable, close-fitting everyday girth for schooling, hacking, jumping and general yard work.

The curved cut follows the natural shape of the horse behind the elbow, so the girth sits where the body is narrowest and allows the shoulder and foreleg to move freely. The waffle material helps reduce chafing, a common cause of girth rubs on horses in regular work.

Key Features

• Anatomic shaped profile - curved lines are more ergonomic for the horse's shape and help prevent interference with the elbow
• Waffle material - textured surface helps reduce chafing and rubbing
• Elastic at both ends - spreads pressure evenly on each side and allows movement as the horse breathes
• Martingale and training aid rings - simple, secure attachment point without extra fittings
• Versatile - suitable for flatwork, jumping, hacking and general schooling
• Everyday practicality - straightforward to clean and quick to check before each ride

Specifications

Browse more girths and saddle accessories in our girths collection.

How To Use

1. Measure a girth that already fits your horse from buckle end to buckle end, or measure between the saddle girth straps under the belly, and choose your size from that figure.
2. Position the girth so the curved section sits behind the elbow and the rings are centred underneath the horse.
3. Attach on the off side first, using the same two girth straps on both sides of the saddle.
4. Fasten loosely on the near side, mount or lead forward a few steps, then tighten gradually a hole at a time.
5. Check the buckles sit above the elbow and finish within the middle holes of the girth straps, leaving room to adjust.
6. Recheck the tension after a few minutes of work and again before jumping.

FAQ

What size girth do I need?
Measure an existing girth that fits well from buckle end to buckle end, or pass a tape under the belly between the saddle's girth straps. The buckles should sit above the elbow and fasten within the middle holes on both sides so you can tighten or loosen as needed.

Is a shaped girth better than a straight girth?
A shaped girth is cut away behind the elbow, which suits horses that are wide through the barrel or prone to girth rubs, as it reduces pressure and interference at the elbow. A straight girth can still work well on horses with a more upright, well-defined girth groove.

What are the rings on the girth for?
The rings allow you to attach a martingale, breastplate strap or training aid directly to the girth without threading it around the whole girth or adding extra fittings.

Why does the girth have elastic at both ends?
Elastic at both ends lets the girth give slightly as the horse breathes and works, and it spreads pressure evenly across both sides rather than loading one side only, which can pull the saddle off centre.

Will it stop girth galls?
The waffle material helps reduce chafing and the shaped cut reduces pressure behind the elbow, but correct sizing, gradual tightening and a clean, dry girth matter just as much. Always check the girth area after riding.

How do I clean the girth?
Wipe off sweat and mud after each ride, clean regularly with warm water and a mild, suitable cleaner and allow to dry naturally away from direct heat. Check the stitching, elastic and buckles before every ride.

About Mackey

Mackey supply practical, everyday equestrian equipment for riders and working yards, covering saddlery, horse wear and stable essentials designed for regular use in schooling, hacking and general horse care.