Majyk Equipe Boyd Martin Hind Jump Boots (Pair)
Description
Majyk Equipe Boyd Martin Hind Jump Boots - Professional Level Protection
The Majyk Equipe Boyd Martin Hind Jump Boot is a two-part moulded hind protection boot made from German grade BASF TPU and sold as a pair. It is built for jumping, eventing and cross-country schooling horses that need serious strike protection without the heat of a traditional neoprene boot.
The soft outer body wraps and flexes with the leg, while the harder strike plate withstands shock at a much higher level than most single mould soft touch boots. Best for riders who jump regularly and for sensitive horses that react to neoprene.
Key Features
- Two-part moulded construction in German grade BASF TPU, heat sealed to form an unbreakable bond
- Soft flexible main body with a reinforced hard strike plate area
- Secondary layer of ARTi-LAGE protection inside the Strike Guard
- Extra layer of impact protection bonded all over the inner foam - a professional level boot
- Extra-large vents lined with micro mesh filters for generous air flow
- Cooler running lower leg - overheating is a leading cause in bowed tendons and suspensory injuries
- Neoprene-free Bio foam inner that helps prevent heat build up and stays fresher and more sanitary for longer
- High quality closures with brass studs
- Two strap length options for finer boned and thicker boned horses
- Sold as a pair
Specifications
| Brand | Majyk Equipe |
|---|---|
| Product | Boyd Martin Hind Jump Boot |
| Leg | Hind |
| Outer material | German grade BASF TPU, two-part moulded and heat sealed |
| Inner lining | Neoprene-free Bio foam with bonded impact protection layer |
| Strike area | Hard strike plate with secondary ARTi-LAGE layer inside the Strike Guard |
| Ventilation | Extra-large vents with micro mesh filters |
| Fastening | High quality closures, brass studs |
| Full Size hind strap length | 3.75 in (9.5 cm) |
| Wide Full Size hind strap length | 4.75 in (12 cm) |
| Sold as | Pair |
| Country of origin | China |
How to Use
- Brush the hind legs clean and dry before fitting, so grit is not trapped against the skin.
- Position the boot on the inside of the hind cannon bone with the strike plate facing outwards and the vents sitting flat.
- Fasten the straps from the top down, working evenly so the boot sits level.
- Check the fit - you should be able to slide a finger between the boot and the leg without the boot sliding down.
- Remove the boots after work, rinse off mud and sweat, wipe the lining and dry naturally away from direct heat.
Browse more leg protection in our horse boots collection.
FAQ
Are these boots neoprene free?
Yes. The inner Bio foam is neoprene free, which helps prevent heat build up and makes the boot a suitable choice for sensitive horses.
Which strap length should I choose?
Full Size hind boots have a 3.75 in (9.5 cm) strap length for finer boned horses. Wide Full Size hind boots have a 4.75 in (12 cm) strap length for thicker boned horses. Measure the cannon bone and compare with boots your horse already wears.
Are they sold as a pair?
Yes, these hind boots are sold as a pair.
What makes them cooler than standard boots?
Extra-large vents lined with micro mesh filters allow generous air flow, and the neoprene-free Bio foam inner helps prevent heat build up. Cool air helps prevent overheating of the lower leg, a leading cause in bowed tendons and suspensory injuries.
How much protection do they offer?
The hard strike plate is backed by a secondary layer of ARTi-LAGE inside the Strike Guard, plus an extra layer of impact protection bonded all over the inner foam, making this a professional level boot.
How do I clean them?
Rinse off mud and sweat after use, wipe the lining and allow the boots to dry naturally away from direct heat sources.
About Majyk Equipe
Majyk Equipe produces technical protective boots for jumping, eventing and everyday schooling, focusing on impact absorption, ventilation and neoprene-free linings. The Boyd Martin range is specified for professional level work.