Majyk Equipe Boyd Martin Tendon Jump Boots

Majyk Equipe Boyd Martin Tendon Jump Boots

The Majyk Equipe Boyd Martin Tendon Jump Boots are professional level front tendon boots, moulded in two parts from German grade BASF TPU and sold as a pair. They are designed for jumping, cross country schooling and everyday flatwork, where the horse needs a flexible boot body combined with a hardened strike plate over the vulnerable tendon area.

They suit riders who want serious impact protection without neoprene: the inner Bio foam is neoprene free and helps prevent heat build up, which makes these boots a good option for the sensitive or thin-skinned horse. Browse more horse boots to complete the set.

Key Features

• Two-part moulded design: soft, flexible boot body that wraps around the leg and moves with the horse, paired with a harder strike plate zone.
• German grade BASF TPU outer: heat sealed rather than stitched, forming an unbreakable bond between the two mouldings.
• Higher shock resistance: the strike plate area withstands shock at a much higher level than most single mould soft touch boots.
• Extra-large vents with micro mesh filters: generous air flow keeps cool air moving over the lower leg. Overheating of the lower leg is a leading cause in bowed tendons and suspensory injuries.
• ARTi-LAGE secondary layer: sits inside the Strike Guard for an additional stage of protection.
• Neoprene-free Bio foam lining: helps prevent heat build up and keeps the boots fresher and more sanitary for longer.
• All-over impact protection layer: bonded to the inner foam, giving the boot its professional level specification.
• High quality closures and brass studs: secure fastening with a clean, hard-wearing finish.

Specifications

How to Use

1. Brush the lower leg clean and dry before fitting, so grit is not trapped against the skin.
2. Position the boot so the hardened strike plate sits over the inside of the tendon area and the vents face outward.
3. Wrap the boot around the leg and fasten the straps from the top down, keeping the tension even.
4. Check you can slide a finger between the boot and the leg - snug enough not to slip, loose enough not to pinch.
5. Remove the boots after work, rinse off mud and sweat, and leave them to dry naturally away from direct heat.

FAQ

Are these boots sold as a pair?
Yes. The Boyd Martin Tendon Jump Boots are supplied as a pair of front tendon boots.

How do I choose between Full Size and Wide Full Size?
The two options differ in strap length. The Full Size Tendon Boot has a 3" (7.5cm) strap and suits finer boned horses; the Wide Full Size Tendon Boot has a 4" (10cm) strap for thicker boned horses such as heavier types and cobs. Measure around the lower leg before ordering.

Do these boots contain neoprene?
No. The inner Bio foam is neoprene free, which helps prevent heat build up and makes the boots a good choice for the sensitive horse.

What are the hind boot strap lengths?
In the matching hind boot, the Full Size has a 3.75" (9.5cm) strap and the Wide Full Size has a 4.75" (12cm) strap.

How do the vents help?
The extra-large vents are lined with micro mesh filters to allow generous air flow. Cool air helps prevent overheating of the lower leg, a leading cause in bowed tendons and suspensory injuries.

How should I clean them?
Rinse off mud and sweat after use and let the boots dry naturally away from direct heat. Inspect the shell, foam and straps regularly and replace the boots if the shell cracks or the padding has been crushed by a heavy impact.

About Majyk Equipe

Majyk Equipe builds technical protective boots for eventing, showjumping and daily schooling, with a focus on impact absorption, ventilation and neoprene-free linings. The Boyd Martin range is made to professional level specification for horses in regular jumping work.