Majyk Equipe Infinity Tendon Jump Boots for Horses
Description
Majyk Equipe Infinity Tendon Jump Boots
The Majyk Equipe Infinity Tendon Jump Boots are front leg protection boots moulded from German grade BASF TPU and sold as a pair. They are designed for horses jumping, schooling and working over poles, where a flexible outer shell and a hardened strike area are both needed on the same boot.
The main shell is soft enough to wrap comfortably around the leg and flex with movement, while the harder strike area is built to withstand shock at a much higher level than most boots. Extra-large vents lined with micro mesh filters allow generous air flow, and cool air helps prevent overheating of the lower leg, a leading cause in bowed tendons and suspensory injuries.
Key Features
- Uniquely moulded from German grade BASF TPU
- Soft, flexible main shell with a much harder strike area for shock resistance
- Extra-large vents lined with micro mesh filters for generous air flow
- Secondary layer of ARTi-LAGE protection inside the Strike Guard
- Neoprene-free Bio foam inner liner that helps prevent heat build-up and nasty smells
- Best for sensitive horses prone to rubs and overheating in closed boots
- Double-stitched Velcro closures for durability
- Sold as a pair
Specifications
| Brand | Majyk Equipe |
|---|---|
| Product | Infinity Tendon Jump Boot |
| Outer shell | German grade BASF TPU |
| Strike area | Hardened Strike Guard with secondary ARTi-LAGE layer |
| Inner liner | Neoprene-free Bio foam |
| Ventilation | Extra-large vents with micro mesh filters |
| Fastening | Double-stitched Velcro closures |
| Fits | Front legs |
| Supplied as | Pair |
| Country of origin | China |
Browse more leg protection in our horse boots collection.
How to Use
- Measure the cannon bone length and fetlock circumference of your horse's front legs and compare with the size guide before ordering.
- Brush the legs clean and dry so no grit is trapped under the boot.
- Position the boot on the front leg with the strike pad over the inside of the cannon bone, sitting clear of the knee and above the fetlock joint.
- Fasten the Velcro straps from the top down, snug enough to hold the boot in place but not tight enough to restrict movement.
- Walk the horse for a few minutes and re-check the position and tension before working.
- Remove after work, brush off dirt, wipe the shell and allow to air dry away from direct heat.
FAQ
Are these boots sold as a pair?
Yes. The Infinity Tendon Jump Boots are supplied as a pair for the front legs.
What are the boots made from?
The outer shell is uniquely moulded from German grade BASF TPU, with a secondary layer of ARTi-LAGE protection inside the Strike Guard and a neoprene-free Bio foam inner liner.
Are they suitable for a sensitive horse?
Yes. The liner is neoprene-free Bio foam, which helps prevent heat build-up and nasty smells, making the boots a good choice for sensitive-skinned horses.
How do I choose the right size?
Measure the cannon bone length and the circumference around the fetlock, then check against the size guide. A boot that is too short or fastened too loosely can slip, which is the most common reason horse owners return jump boots.
Do the vents really make a difference?
The extra-large vents are lined with micro mesh filters to allow generous air flow. Cool air helps prevent overheating of the lower leg, a leading cause in bowed tendons and suspensory injuries.
How should I clean them?
Brush off mud and grit, wipe the TPU shell with a damp cloth and leave to dry naturally away from direct heat or sunlight.
About Majyk Equipe
Majyk Equipe produces technical leg protection for jumping, cross country and daily schooling, pairing moulded outer shells with impact-absorbing liners and breathable construction for horses in consistent work.