Wintec Standard Comfort Pad Saddle Riser for Horses
Description
Wintec Standard Comfort Pad - Even Lift and Spine Clearance Under the Saddle
The Wintec Standard Comfort Pad is a shock-absorbing foam saddle pad that adds even height throughout the length of the saddle to help achieve a balanced, comfortable fit. It is designed for horses that need extra lift all the way along the panel, rather than a wedge or shim at one end.
It suits young horses, horses returning to work that are changing shape or lacking topline, and horses being ridden in a saddle whose panel shape is not an ideal match. Anatomic shaping and a moulded spine chamber keep pressure off the spine while the highly resilient foam absorbs concussion.
Key Features
- Even height throughout - lifts the saddle along its full length to help balance it on the back
- Highly resilient foam - shock-absorbing and supportive, recovering its shape between rides
- Anatomic shaping - contoured to follow the line of the horse's back
- Moulded spine chamber - gives greater clearance over the spine and wither
- Pressure point relief - helps spread load where a panel is the incorrect shape for the horse
- Best for changing shapes - youngsters, horses coming back into work, and horses lacking topline
Specifications
| Brand | Wintec |
|---|---|
| Product | Standard Comfort Pad |
| Type | Saddle riser and comfort pad |
| Material | Highly resilient shock-absorbing foam |
| Profile | Standard - even lift front to back |
| Shaping | Anatomic with moulded spine chamber |
| Use | Schooling, hacking, flatwork, general riding |
| Country of origin | Vietnam |
Browse more saddle pads and numnahs to complete your setup.
How to Use
- Place a clean numnah or saddle cloth on the horse's back first.
- Lay the Comfort Pad on top, with the moulded spine chamber sitting centrally over the spine.
- Position the saddle over the pad and pull the pad and cloth up into the gullet so there is clear space over the wither and spine.
- Girth up gradually and check the saddle sits level, with no rocking or bridging.
- Ride in walk first and reassess balance, then remove after use and check the back for any uneven sweat or rub marks.
- Brush the pad clean, air dry away from direct heat, and store flat.
FAQ
What does the Wintec Standard Comfort Pad do?
It adds even height throughout the length of the saddle to help achieve a balanced fit, while highly resilient foam absorbs shock and a moulded chamber gives greater spine clearance.
Which horses is it best for?
It is useful for young horses, horses coming back into work that are changing shape or lack topline, and horses ridden in a saddle where the panel is the incorrect shape.
What is the difference between a standard pad and a wedge or riser pad?
The standard pad lifts the saddle evenly from front to back. A wedge or shim pad raises one end only, to correct a saddle sitting low at the front or rear.
Do I still need a numnah underneath?
Yes. Use the Comfort Pad over a numnah or saddle cloth so the sweat and dirt are taken by the washable layer next to the horse.
Will it make a tight saddle fit?
No. Adding a pad under a tight or close-fitting saddle can create pressure rather than relieve it. Always check saddle fit with the pad in place, ideally with a qualified saddle fitter.
How do I clean it?
Brush off hair, dirt and dried sweat after use and allow it to air dry naturally away from direct heat. Replace the pad when the foam no longer recovers its shape.
About Wintec
Wintec is widely recognised for synthetic saddles and saddle-fitting accessories built around practicality and easy care. Its comfort and shim pads are made to work alongside saddles on horses whose shape changes through growth, fitness work and the seasons.