Woof Wear Elite Comfort Plus DR Dressage Saddle Pad
Description
Woof Wear Elite Comfort Plus DR Pad - Dressage Saddle Pad with Corrective Foam
The Woof Wear Elite Comfort Plus DR Pad is a dressage-cut saddle pad built with 15mm high density impact absorbing foam, an anti-slip velvet underside and a high wither design for exceptional spine clearance. It is best for dressage and flatwork riders who want a stable, cushioning pad that also carries an extra corrective foam panel to refine saddle fit and reduce pressure.
It suits horses in regular schooling, riders competing in dressage, and anyone whose saddle sits close to correct but benefits from a little extra support through the panel area. Browse more saddlecloths and numnahs to complete your tack room.
Key Features
- Anti-slip design to keep the pad in position under the saddle
- 15mm high density impact absorbing foam for cushioning and pressure distribution
- High wither design with exceptional spine clearance
- Velvet underside that naturally grips in place while wicking away moisture
- D-ring attachments for secure fitting to the saddle
- Durable 900 denier panel with built-in girth loops
- Extra 15mm corrective and supportive foam panel to enhance fit and reduce pressure
- Corrective panel features a micro-silicone anti-slip area
Specifications
| Brand | Woof Wear |
|---|---|
| Model | Elite Comfort Plus DR Pad |
| Cut | Dressage (DR) |
| Foam | 15mm high density impact absorbing foam |
| Corrective Panel | Additional 15mm corrective and supportive foam with micro-silicone anti-slip area |
| Underside | Velvet - grips naturally and wicks moisture |
| Outer Panel | 900 denier with built-in girth loops |
| Attachments | D-ring attachments and girth loops |
| Wither | High wither design with spine clearance |
How to Use
- Place the pad slightly forward on the withers, then slide it back into position so the coat lies flat.
- Fit the saddle on top and attach the D-rings to the saddle billets or points as appropriate.
- Thread the girth through the built-in girth loops on the 900 denier panel.
- Lift the pad up into the gullet so the spine channel is clear before fastening the girth fully.
- Mount and re-check wither and spine clearance, adjusting the corrective panel position if required.
- After riding, brush off hair and dried mud and allow the pad to dry naturally away from direct heat.
FAQ
Is this pad only for dressage saddles?
It is a dressage cut, shaped for long, straight-flapped dressage saddles. A general purpose or jump saddle will usually overhang the shaping, so a GP-cut pad is a better match.
What does the corrective foam panel do?
The extra 15mm corrective and supportive foam panel enhances fit and helps reduce pressure. It is useful where a saddle sits close to correct but needs a little extra support; it is not a substitute for professional saddle fitting.
Will the pad slip during work?
The pad uses an anti-slip design, a velvet underside that naturally grips in place, D-ring attachments and built-in girth loops. The corrective panel also has a micro-silicone anti-slip area for extra stability.
Does it clear the spine properly?
Yes, the high wither design gives exceptional spine clearance. Always lift the pad into the gullet before girthing up and check clearance again once mounted.
How do I choose the right size?
Match the pad size to the length of your dressage saddle and the length of your horse's back. Wrong size and wrong cut are the two most common reasons pads are returned, so measure your saddle before ordering.
How should I wash it?
Remove hair and dried mud with a brush after each use and dry naturally away from direct heat. Always follow the care label sewn into the pad.
About Woof Wear
Woof Wear is a British equestrian brand specialising in technical protective equipment for horse and rider. The range is developed around performance materials and practical design, with products used daily on yards and at competition across the UK.