LeMieux Gel-Tek Shaped Half Pad Saddle Pad for Horses

LeMieux Gel-Tek Shaped Half Pad

The LeMieux Gel-Tek Shaped Half Pad is an anatomically cut gel half pad that sits under the saddle to absorb concussion and distribute weight evenly across the horse's back. It is best for riders who want extra cushioning and saddle stability for schooling, hacking and jumping without adding bulk or interfering with the fit of a well-fitted saddle.

A 7mm layer of shock-absorbing gel does the work, while the shaped cut gives full wither clearance and a discreet profile under the saddle flap. The breathable, ventilated gel pattern is designed to alleviate pressure across the back, and a trim-to-fit line on the front edge lets you cut the pad to the exact length you want.

Key Features

• 7mm shock-absorbing gel: distributes weight evenly across the back and helps minimise slipping and movement
• Anatomic shaped cut: full wither clearance, sits discreetly under the saddle without affecting fit
• Ventilated gel pattern: breathable construction designed to alleviate pressure across the horse's back
• Trim-to-fit front edge: cut along the marked line to customise pad length to your saddle
• Saddle stability: secure saddle positioning for flatwork, hacking and jumping
• Discreet styling: a clean, low-profile look that blends performance with elegance

Browse more saddlery and numnahs in our saddle pads collection.

Specifications

How to Use

1. Place the half pad on the horse's back, positioning it well forward so the shaped cut-out sits clear of the wither.
2. Set the saddle on top of the pad, then slide both back slightly into the natural saddle position so the hair lies flat.
3. Lift the pad up into the saddle gullet before girthing so it does not press down on the wither or spine.
4. Girth up gradually and check that there is clear space at the wither with the rider mounted.
5. If the pad extends past your saddle, trim in small stages along the marked front line until the length suits, cutting no more than necessary.
6. After riding, wipe the gel clean with a damp cloth and allow it to dry naturally away from direct heat.

FAQ

Does a gel half pad change how my saddle fits?
The Gel-Tek Shaped Half Pad is anatomically cut to sit discreetly under the saddle without affecting the fit. It is designed to support an already well-fitting saddle, not to correct a saddle that fits poorly - have your saddle checked regularly by a qualified saddle fitter.

How thick is the gel?
The pad uses a 7mm layer of shock-absorbing gel, which distributes weight evenly across the horse's back while remaining slim enough to stay discreet under the saddle.

Can I cut the pad to fit my saddle?
Yes. The front edge has a trim-to-fit line so you can cut the pad to customise its length. Trim a small amount at a time, as material cannot be replaced once removed.

Will it stop my saddle slipping?
The gel layer is designed to minimise slipping and movement and to help hold the saddle in a secure position. It supports saddle stability but is not a substitute for correct saddle fit and girthing.

Is it breathable enough for hot weather?
The gel is moulded in a ventilated pattern that allows air to move through the pad, which helps keep the back more comfortable in warmer conditions and longer sessions.

How do I clean it?
Wipe the gel surface with a damp cloth to remove sweat and dirt, then leave it to dry naturally away from direct heat or sunlight.

About LeMieux

LeMieux is a British equestrian brand producing saddlery, horsewear and rider apparel for everyday yard life, schooling and competition. Its products are known for technical detailing, coordinated colourways and a clean, considered finish.