Shoof MK2 TailWell Tail Trimmer Drill Attachment

The Shoof MK2 TailWell Tail Trimmer is a drill-powered attachment for trimming the tails of milking cows, fitted to any suitable cordless drill of 14 volts or better via its chuck shank. It is designed for dairy farmers, herd managers and stock handlers who want to tidy tail switches quickly during milking rather than setting up a separate handling session.

Each tail takes only 3-4 seconds, the action is quiet and smooth, and the oscillating outer blade runs over a fixed inner blade so there is no risk of injury to operator or animal. The drill is not provided. Browse more yard and livestock kit in our stable and yard equipment collection.

Key Features

• Trims in 3-4 seconds per tail — fast enough to fit into the normal milking routine.
• Fits standard cordless drills — chuck shank mounting, 14V or better producing approx. 1,000rpm.
• Safe oscillating blade system — outer blade moves over a fixed inner blade, so there is no risk of injury to man or cow.
• Integrated neck strap — keeps the unit hands-free between cows.
• Quiet in use — smooth cutting action helps keep cattle settled.
• No pre-cutting required — handles the tail switch even when very dirty.
• Replaceable blades — replacement blade sets are available separately.

Specifications

How to Use

1. Fit the chuck shank securely into a cordless drill of 14 volts or better, running at approximately 1,000rpm.
2. Place the neck strap over your head so the trimmer can hang hands-free between animals.
3. Apply lubrication to the blades before you begin trimming.
4. Bring the trimmer to the tail switch and run the drill; each tail takes around 3-4 seconds. No pre-cutting is needed.
5. Re-apply lubrication every 80-100 tails to keep the cutting action smooth.
6. Clean the blades after use and store the unit dry. Fit a replacement blade set when the edges dull.

FAQ

Is a drill included with the Shoof MK2 Tail Trimmer?
No. The drill is not provided. The trimmer fits by chuck shank into any suitable cordless drill of 14 volts or better producing approximately 1,000rpm.

How long does it take to trim one tail?
Approximately 3-4 seconds per tail, which means it can be done during milking without slowing the routine.

Is it safe for the cow and the operator?
The outer blade oscillates over a fixed inner blade, so there is no risk of injury to man or cow.

Do I need to pre-cut the tail switch first?
No. Pre-cutting is not necessary, even if the tail switch is very dirty.

How often should the blades be lubricated?
Apply lubrication at the start of operation and re-apply every 80-100 tails.

Can the blades be replaced?
Yes. Replacement blade sets are available separately.

About Shoof

Shoof produces practical livestock husbandry and handling equipment used on dairy and beef units worldwide, with a focus on tools that make routine parlour and yard tasks quicker and safer.